ProAiir Hybrid Zombie #4 Colors, 2oz set

APPLICATION

• Shake well before use.
• No thinning needed. ProAiir is ready to spray right out of the bottle.
• Apply on clean skin, free of sunscreens or lotions.
• Airbrush with pressure at 15-20 PSI. In extreme heat, increase to 20-25 PSI.
• Overlay / Mix ProAiir colors to create new shades and tones! Apply in thin layers to avoid cracking.

REMOVAL / CLEANING

• Remove from skin by lathering liquid soap into your design, then rise with water. Soap FIRST, then water.
• Clean your airbrushes with 91% alcohol or denatured alcohol. NO WATER!
• For clothing, soak in alcohol and dab with a cloth to get as much color out as you can.

LONGEVITY FACTORS

• All skin types are different. One person’s design may last longer than another simply
  because their skin exfoliates faster or slower.
• If a client has been consuming alcohol, their designs will come off faster because the alcohol will sweat through the pores, causing the removal of the makeup.
• If you want your designs to last a little longer, apply a thin layer of ProLong to your art.

SPECIAL NOTES

• Separation of pigments is normal. Pigment will settle to the bottom of the bottle over time. Simply shake until blended again.
• Do not apply on sunburnt skin, open wounds, or sores.
• Use plastic bottles for best results (or just the ProAiir bottles). Glass bottles attract hear, curing faster evaporation of product causing it to get thick.
• DO NOT mix ProAiir with water. Make sure to empty the water trap after each gig if you are
  using a compressor.
• Clean stencils by soaking in alcohol and gently brush away the makeup with any soft bristled brush.